Codename46
12-18-2020, 05:36 PM
I hate to see this go, but I've got another project that needs funding.
This is a lightly-used, limited-release version of the CZ Bren 2. Known as the CZ Bren 2S, a small number of these (less than 300 total) were released in the US in the original configuration as the ones issued to the Czech Military. Featuring a slim, monolithic upper with MLOK slots, these were eventually replaced by the CZ Bren 2MS, which featured a thicker upper receiver with different cuts and handguard design. Prepper Gun Shop exclusively sold this limited run of 2S rifles, and this particular one was configured with a SBA3 brace.
This particular one is the most desirable variant of all the Bren 2S, with a 11" barrel and chambered in 5.56. There's probably less than 50 of this variant produced. The other variants were 5.56 in a 8" barrel (too short for 5.56), or a 14" barrel (made the gun look really clunky), and 7.62x39 in the 3 barrel lengths that only accepted proprietary magazines.
Other features include:
Truly ambidextrous design, with an ambi 45-degree selector, ambi mag release, ambi bolt release, and an integrated battery assist and bolt release combo button
Non-reciprocating charging handle that can be swapped left or right side
Carbine-length buffer with SBA3 brace, permanently configured to be less than 13.5" length of pull
Really crisp and light 2-stage trigger
Adjustable gas piston system with 3 positions for optimal shooting with suppressors
QD sockets for slings on the left and right sides of the receiver
Original CZ sights included
Dead Air Sandman Keymount Muzzle Brake has been installed, torqued, and timed. This will allow you to mount a Dead Air suppressor, or a Silencerco suppressor with a Dead Air Keymount adapter. I will also include the original CZ flash hider.
I've put less than 500 rounds total in this gun, which is evident by the lack of wear on the exterior parts. The only noticeable wear is the marks on the pictatinny slots where I mounted a red dot.
The last completed Gunbroker sale on of these was $2200 for this exact model without the SBA3 brace. I'm looking to get $2150 for everything described.
The only trade I will entertain is a NIB STI Staccato XC plus cash on my end. Otherwise, cash. Local sale in Tucson, AZ, although I will drive up to a 30 mile radius from Marana for my asking price. Please TEXT me at (559)-762-2547 as I don't check my inbox here regularly and I don't answer phone calls from people I don't know.
Considering Biden wants to ban firearm imports, better jump on this sooner rather than later.
This is a lightly-used, limited-release version of the CZ Bren 2. Known as the CZ Bren 2S, a small number of these (less than 300 total) were released in the US in the original configuration as the ones issued to the Czech Military. Featuring a slim, monolithic upper with MLOK slots, these were eventually replaced by the CZ Bren 2MS, which featured a thicker upper receiver with different cuts and handguard design. Prepper Gun Shop exclusively sold this limited run of 2S rifles, and this particular one was configured with a SBA3 brace.
This particular one is the most desirable variant of all the Bren 2S, with a 11" barrel and chambered in 5.56. There's probably less than 50 of this variant produced. The other variants were 5.56 in a 8" barrel (too short for 5.56), or a 14" barrel (made the gun look really clunky), and 7.62x39 in the 3 barrel lengths that only accepted proprietary magazines.
Other features include:
Truly ambidextrous design, with an ambi 45-degree selector, ambi mag release, ambi bolt release, and an integrated battery assist and bolt release combo button
Non-reciprocating charging handle that can be swapped left or right side
Carbine-length buffer with SBA3 brace, permanently configured to be less than 13.5" length of pull
Really crisp and light 2-stage trigger
Adjustable gas piston system with 3 positions for optimal shooting with suppressors
QD sockets for slings on the left and right sides of the receiver
Original CZ sights included
Dead Air Sandman Keymount Muzzle Brake has been installed, torqued, and timed. This will allow you to mount a Dead Air suppressor, or a Silencerco suppressor with a Dead Air Keymount adapter. I will also include the original CZ flash hider.
I've put less than 500 rounds total in this gun, which is evident by the lack of wear on the exterior parts. The only noticeable wear is the marks on the pictatinny slots where I mounted a red dot.
The last completed Gunbroker sale on of these was $2200 for this exact model without the SBA3 brace. I'm looking to get $2150 for everything described.
The only trade I will entertain is a NIB STI Staccato XC plus cash on my end. Otherwise, cash. Local sale in Tucson, AZ, although I will drive up to a 30 mile radius from Marana for my asking price. Please TEXT me at (559)-762-2547 as I don't check my inbox here regularly and I don't answer phone calls from people I don't know.
Considering Biden wants to ban firearm imports, better jump on this sooner rather than later.