glockguy41
04-05-2025, 01:45 PM
SOLD
Reply with a number to glockguy41@gmail.com
Must be able to pick up nights and weekends near McQueen and San Tan 202.
Can meet during the day while I work as I travel around Chandler.
This is a Daniel Defense Limited Series 11 version.
They started this limited series rifle a year ago and they made a few of them and once sold, they are gone. They could only be purchased directly from Danial Defense. Most sold out within hours the longest one took 1 day to sell out.
This was $4600 all in.
About 200 rounds through it.
Will come exactly as received from Daniel Defense as shown in the pictures. The Eotech cases were not included.
Willing to sell for $4200
Willing to trade for a Staccatto XC.
Would take a stock Glock 19 Gen 5 stock or with night sites only in new or like new condition, obviously plus cash. Not looking for any upgraded versions.
Here are the details.
By the People — our eleventh Limited Series build and final of the year — is extra special to us, as everyone from the manufacturing floor to the front office had a say in the design.
The end result is our best-selling M4A1 RIII carbine, featuring a fully ambidextrous lower that allows left- and right-handed shooters to operate the bolt catch, safety selector, and magazine release without moving or removing their dominant hand from the rifle’s grip.
The rifle is built around a 14.5” Cold Hammer Forged M4 Profile barrel with a permanently attached HuxWrx Flash Hider. It features our 12.5” RIS III rail with popular M-LOK attachment for lighter weight and plenty of real estate for all the accessories this firearm comes standard with, including an Eotech HWS EXPS3 Holographic Sight that allows for extremely fast target acquisition and a compact Eotech Magnifier G43 for fast transition from 3X to 1X.
A dual-fuel SureFire Scout Light Pro can be powered by its included rechargeable lithium-ion battery or two 123A disposables and cranks out up to 1,500 lumens of blinding white light. Rounding out the build is an Emissary Development Handbrake, a Blue Force Gear Custom Padded Vickers Sling, an upgraded Daniel Defense branded hard case, a Commemorative Challenge Coin, and even a Certificate of Authenticity to let everyone who can’t recognize it just by looking at this beautiful rifle that it’s an extremely rare firearm that only a handful of others possess!
INCLUDED IN THIS PACKAGE
14.5” COLD HAMMER FORGED M4 PROFILE BARREL (CHAMBERED IN 5.56MM) WITH PERMANENTLY ATTACHED HUXWRX FLASH HIDER
RIS III 12.5” RAIL WITH POPULAR M-LOCK ATTACHMENT
DANIEL DEFENSE MILSPEC BUTTSTOCK & PISTOL GRIP
C&B QUALITY COATINGS CHOCOLATE CHIP CERAKOTE FINISH
GEISSELE SSA TRIGGER
EOTECH HWS EXPS3 HOLOGRAPHIC SIGHT & G43 MAGNIFIER
1,500-LUMEN SUREFIRE SCOUT LIGHT PRO DUAL FUEL
EMISSARY DEVELOPMENT HANDBRAKE
BLUE FORCE GEAR PADDED VICKERS SLING WITH QD SWIVELS
DANIEL DEFENSE 32-ROUND MAGAZINE (1)
DANIEL DEFENSE HARD CASE
CUSTOM DANIEL DEFENSE COOKIE PATCH
COMMEMORATIVE CHALLENGE COIN & CERTIFICATE OF AUTHENTICITY
MATERIALS & CONSTRUCTION
LOWER RECEIVER: Proprietary with Enhanced Flared Magazine Well, Fully Ambidextrous Controls and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 Twist, 14.5" M4 Profile, Chrome Lined, Mil-Spec Heavy Phosphate Coated, and HP/MPI Tested
GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 Hardened Steel with Mil-Spec Heavy Phosphate Coating, Mid-length, Direct Impingement
MUZZLE DEVICE: HuxWrx Flash Hider-QD 5.56, 1/2x28
BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key
BUFFER: H Buffer
SIGHTS: Eotech HWS EXPS3, FDE (EXPS3-0TAN) & Eotech Magnifier G43, FDE (G43.STSTAN)
HANDGUARD: Daniel Defense RIS III 12.5, Patented, 6-Bolt Bolt-Up System, Flat Dark Earth CNC Machined of 6061-T6 Aluminum
CHARGING HANDLE: GRIP-N-RIP Charging Handle, Body CNC Machined of 7075-T6 Aluminum, Handles & Latch CNC Machined of 6061-T6 Aluminum, Heavy Duty Stainless Steel Roll Pins, Type III Hard Coat Anodized
RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum
BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
Made in the USA!
170571705817059
Reply with a number to glockguy41@gmail.com
Must be able to pick up nights and weekends near McQueen and San Tan 202.
Can meet during the day while I work as I travel around Chandler.
This is a Daniel Defense Limited Series 11 version.
They started this limited series rifle a year ago and they made a few of them and once sold, they are gone. They could only be purchased directly from Danial Defense. Most sold out within hours the longest one took 1 day to sell out.
This was $4600 all in.
About 200 rounds through it.
Will come exactly as received from Daniel Defense as shown in the pictures. The Eotech cases were not included.
Willing to sell for $4200
Willing to trade for a Staccatto XC.
Would take a stock Glock 19 Gen 5 stock or with night sites only in new or like new condition, obviously plus cash. Not looking for any upgraded versions.
Here are the details.
By the People — our eleventh Limited Series build and final of the year — is extra special to us, as everyone from the manufacturing floor to the front office had a say in the design.
The end result is our best-selling M4A1 RIII carbine, featuring a fully ambidextrous lower that allows left- and right-handed shooters to operate the bolt catch, safety selector, and magazine release without moving or removing their dominant hand from the rifle’s grip.
The rifle is built around a 14.5” Cold Hammer Forged M4 Profile barrel with a permanently attached HuxWrx Flash Hider. It features our 12.5” RIS III rail with popular M-LOK attachment for lighter weight and plenty of real estate for all the accessories this firearm comes standard with, including an Eotech HWS EXPS3 Holographic Sight that allows for extremely fast target acquisition and a compact Eotech Magnifier G43 for fast transition from 3X to 1X.
A dual-fuel SureFire Scout Light Pro can be powered by its included rechargeable lithium-ion battery or two 123A disposables and cranks out up to 1,500 lumens of blinding white light. Rounding out the build is an Emissary Development Handbrake, a Blue Force Gear Custom Padded Vickers Sling, an upgraded Daniel Defense branded hard case, a Commemorative Challenge Coin, and even a Certificate of Authenticity to let everyone who can’t recognize it just by looking at this beautiful rifle that it’s an extremely rare firearm that only a handful of others possess!
INCLUDED IN THIS PACKAGE
14.5” COLD HAMMER FORGED M4 PROFILE BARREL (CHAMBERED IN 5.56MM) WITH PERMANENTLY ATTACHED HUXWRX FLASH HIDER
RIS III 12.5” RAIL WITH POPULAR M-LOCK ATTACHMENT
DANIEL DEFENSE MILSPEC BUTTSTOCK & PISTOL GRIP
C&B QUALITY COATINGS CHOCOLATE CHIP CERAKOTE FINISH
GEISSELE SSA TRIGGER
EOTECH HWS EXPS3 HOLOGRAPHIC SIGHT & G43 MAGNIFIER
1,500-LUMEN SUREFIRE SCOUT LIGHT PRO DUAL FUEL
EMISSARY DEVELOPMENT HANDBRAKE
BLUE FORCE GEAR PADDED VICKERS SLING WITH QD SWIVELS
DANIEL DEFENSE 32-ROUND MAGAZINE (1)
DANIEL DEFENSE HARD CASE
CUSTOM DANIEL DEFENSE COOKIE PATCH
COMMEMORATIVE CHALLENGE COIN & CERTIFICATE OF AUTHENTICITY
MATERIALS & CONSTRUCTION
LOWER RECEIVER: Proprietary with Enhanced Flared Magazine Well, Fully Ambidextrous Controls and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 Twist, 14.5" M4 Profile, Chrome Lined, Mil-Spec Heavy Phosphate Coated, and HP/MPI Tested
GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 Hardened Steel with Mil-Spec Heavy Phosphate Coating, Mid-length, Direct Impingement
MUZZLE DEVICE: HuxWrx Flash Hider-QD 5.56, 1/2x28
BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key
BUFFER: H Buffer
SIGHTS: Eotech HWS EXPS3, FDE (EXPS3-0TAN) & Eotech Magnifier G43, FDE (G43.STSTAN)
HANDGUARD: Daniel Defense RIS III 12.5, Patented, 6-Bolt Bolt-Up System, Flat Dark Earth CNC Machined of 6061-T6 Aluminum
CHARGING HANDLE: GRIP-N-RIP Charging Handle, Body CNC Machined of 7075-T6 Aluminum, Handles & Latch CNC Machined of 6061-T6 Aluminum, Heavy Duty Stainless Steel Roll Pins, Type III Hard Coat Anodized
RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum
BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
Made in the USA!
170571705817059