csfirearms
03-04-2016, 10:26 AM
SOLD!!!
https://store-candsfirearms-com.3dcartstores.com/Del-Ton-Complete-16-M4-Upper-with-Rear-Flip-Sight_p_518.html
C & S Firearms
San Tan Valley
480 307-4344
charlie@csfirearms.com
This barrel assembly has a 16" barrel with M4 profile, 1x9 twist, CAR handguards with single heat shields, and A2 Flash Hider.
Barrel:
Chrome Moly Vanadium
M4 Feed Ramps
16" Length
1x9 Twist
A2 Flash Hider
Manganese Phosphated
Phosphated under Front Sight Base
Taper Pins on A2 Front Sight Base
Threaded Muzzle
M4 Profile
Chamber:
5.56 X 45 mm
Bolt And Carrier:
Phosphated 8620 Steel Carrier Assembly
Carpenter 158 Bolt HPT/MPI Tested
Heat Treated and Plated
Mil-Spec
Chrome Lined Carrier Interior
Carrier Key - chrome lined, attached with Grade 8 Screws
Properly Staked & Sealed Gas Key
Handguards:
Carbine Length
Aluminum Delta Ring
Single Heat Shield
Upper Receiver:
Forged 7075 T6 Aluminum
A3 Flat Top With M4 Feed Ramps
Hard Coat Anodized
Mil-Spec
Ejection Port Cover and Round Forward Assist
Right Hand Ejection
Bore's surface is coated with dry film lube, over the anodized surface
br> Flip Up Sight:br> br> DTI Flip Up Rear Sight are made from 6061 aluminum mil-spec hardcoat anodized for durability.br> Sight locks in both deployed and folded positions.br> The spring mechanism is quite durable and is completely concealed to prevent fouling from dirt.br> The dual aperture rear BUIS has a conventional large and small aperture.br> The sight deploys with the large aperture.br> Mounts to picatinny rail.br> Made by Samson Mfg.
704
https://store-candsfirearms-com.3dcartstores.com/Del-Ton-Complete-16-M4-Upper-with-Rear-Flip-Sight_p_518.html
C & S Firearms
San Tan Valley
480 307-4344
charlie@csfirearms.com
This barrel assembly has a 16" barrel with M4 profile, 1x9 twist, CAR handguards with single heat shields, and A2 Flash Hider.
Barrel:
Chrome Moly Vanadium
M4 Feed Ramps
16" Length
1x9 Twist
A2 Flash Hider
Manganese Phosphated
Phosphated under Front Sight Base
Taper Pins on A2 Front Sight Base
Threaded Muzzle
M4 Profile
Chamber:
5.56 X 45 mm
Bolt And Carrier:
Phosphated 8620 Steel Carrier Assembly
Carpenter 158 Bolt HPT/MPI Tested
Heat Treated and Plated
Mil-Spec
Chrome Lined Carrier Interior
Carrier Key - chrome lined, attached with Grade 8 Screws
Properly Staked & Sealed Gas Key
Handguards:
Carbine Length
Aluminum Delta Ring
Single Heat Shield
Upper Receiver:
Forged 7075 T6 Aluminum
A3 Flat Top With M4 Feed Ramps
Hard Coat Anodized
Mil-Spec
Ejection Port Cover and Round Forward Assist
Right Hand Ejection
Bore's surface is coated with dry film lube, over the anodized surface
br> Flip Up Sight:br> br> DTI Flip Up Rear Sight are made from 6061 aluminum mil-spec hardcoat anodized for durability.br> Sight locks in both deployed and folded positions.br> The spring mechanism is quite durable and is completely concealed to prevent fouling from dirt.br> The dual aperture rear BUIS has a conventional large and small aperture.br> The sight deploys with the large aperture.br> Mounts to picatinny rail.br> Made by Samson Mfg.
704